Xenocron Product Instructions
This category is for instructions and install guides for all Xenocron Manufacturer products or "kits"
What you need to know about your Xenocron ECU
We sell two kinds of chipped Honda/Acura ECUs and here is what you need to know about the ECU yo...
Thu, 16 Nov, 2017 at 10:04 AM
Brown Wire = VCC (Voltage to Sensor) 5 volt – 12 volt from the ECU Black Wire is the OUTPUT. This is what PULSES and what the ECU Reads. Send this...
Thu, 3 Dec, 2020 at 12:53 PM
11F0 Board - OBD1 Honda ECU VTEC Conversion Kit Installation
First desolder all the spots on the ECU marked, C60, J10, Q101, IC14, & D11. They...
Mon, 22 Jan, 2018 at 10:58 AM
1720 Board – OBD1 Honda ECU VTEC conversion kits Installation
First desolder all the spots on the ECU marked, IC14, Q26, C60, R67, RM11, D11, J10. T...
Wed, 29 Nov, 2017 at 4:13 PM
Dear Customer,
Thank you for purchasing my 1980 (P75) VTEC conversion kit.
First desolder all the spots on the ECU marked, Q26, Q37, Q17, IC14, Q...
Thu, 11 Jan, 2018 at 9:09 AM
Xenocron's PWM Boost Contol Parts Kit – Installation Instructions
For use with OBD1 Honda ECUs and Hondata S300, Neptune RTP or other OBD1 Tu...
Tue, 16 Jan, 2018 at 9:14 AM
4 Port Boost Solenoid Installation & Plumbing
EX – Vent
IN – From Turbo Compressor or Boost Pressure Source
A – To Top Section (Diaphragm) ...
Thu, 30 Nov, 2017 at 5:13 PM
A- MAP sensor ground (typically green with white stripe on most Honda/Acura vehicles) B- MAP sensor signal output (typically white with yellow st...
Thu, 30 Nov, 2017 at 4:45 PM
Xenocron Fuel Pump Relay Kit Instructions
***These are general instructions. Take time to plan out this installation before you cut or install ANYTHING,...
Wed, 7 Apr, 2021 at 3:19 PM
This is our popular tuner harness which is designed for the average street or dyno tuner to EASILY plug into a customers car and easily power, ground and in...
Wed, 29 Nov, 2017 at 4:49 PM