Technical Articles
Technical Articals written by Xenocron
We get many emails that go something like this: Hey I have an OBD1 Honda ECU and I was started the car for the first time (or driving) and started to sm...
Tue, 21 May, 2019 at 10:39 AM
In this edition of our tech posts we will show you how to properly wire and setup a nitrous or water/methanol injection system to be used on your OBD1 Hond...
Thu, 30 Nov, 2017 at 4:15 PM
D.I.Y. Wideband Setup Guide by Xenocron
This guide will encompass setting up your Innovate, PLX or AEM Wideband Controller/Gauge to be able to input,...
Thu, 30 Nov, 2017 at 4:28 PM
How Do I Tell Which ECU Board Number I Have for Your Various
VTEC Conversion Kits?
Open the top cover of the ECU and holding the ECU plugs on ...
Thu, 30 Nov, 2017 at 5:16 PM
PWM Boost Control Solenoid Setup Instructions for OBD1 Hondata S300 or Neptune RTP Install the PWM Solenoid Components to your ECU in the Following Loc...
Tue, 16 Mar, 2021 at 12:32 PM
Before or After you have ordered Crome PRO from Xenocron Tuning, use these instructions to get the Registration String and Unlock the PRO features in Crome....
Tue, 16 Jan, 2018 at 9:06 AM
Tech Article: How to Reset your MOATES OSTRICH using TunerPRO RT Software First, goto the TunerPRO website and download TunerPRO RT http://tu...
Tue, 16 Jan, 2018 at 9:08 AM
RS232 Cable Instructions
Solder the white 4 pin header into spots 1-4 on your ECU in the spot labeled CN2. The cable is already pinned correctly...
Tue, 16 Jan, 2018 at 9:29 AM
http://ecucontrol.com/how_to_mod_my...
Tue, 16 Jan, 2018 at 9:29 AM
USB Datalogging Cable Instructions
Solder the white 4 pin header into spots 1-4 on your ECU in the spot labeled CN2. The cable is already pinne...
Tue, 16 Jan, 2018 at 9:29 AM